DryFire Gun Motion

Gun motion tracks and displays the path of your gun barrel from just before you call "Pull" until just after you fire your shot(s). This makes it ideal for checking the smoothness of your gun motion and for ensuring that you follow through and don't stop the gun after the shot(s).

Requirements

You need:

• The latest version of the DryFire software.
• The Gun Motion add-on - purchased and installed.
• The free Gun Motion app installed on an Apple or Android smartphone/tablet.

  You will require Apple iOS 12.4 or later or Android 6.0 or later.

  Please click here to download the Apple app.

  Please click here to download the Android app.

  Important: your smartphone/tablet must have been manufactured after the beginning of 2017 to ensure that its Bluetooth hardware will work with DryFire Gun Motion.

  Bluetooth must be enabled on your smartphone/tablet.

• Access to wifi. You PC and your smartphone/tablet must to be connected to same wifi router.

Using Gun Motion

Please do things in the following order:

• Check your PC and smartphone/tablet are connected to wifi and that Bluetooth is enabled on your smartphone/tablet.
• Ensure your Universal Gun Assembly (UGA) is fully charged, mounted and switched off.
• Run the DryFire software on your PC.
• Run the Gun Motion app on your smartphone/tablet.
• Switch on the UGA.
• Within a few seconds the smartphone/tablet app will connect to the UGA via Bluetooth.

• During use the app will show how your gun is pointing - cant (roll) and pitch (up/down).
• Next the app will connect to the DryFire software via wifi and the bottom left of the PC screen will show that gun motion as active.

• Your smartphone/tablet will display a cant indicator so put it safely to one side so you can keep an eye on it. Gun motion data will appear after you take a shot - on your PC screen or projection screen if you are using the Projection add-on.

  The app may also be used to set up parameters within the UGA - see the main User Guide for more details.

• You may now carry out muzzle alignment before selecting a layout/target as normal.
• Make a mental note of your hold point before each shot - the point your gun is pointing at when you call "Pull" - you will need this later.
• Call "Pull" and shoot as normal.

Post-shot analysis

After taking your shot the gun motion tracks will be displayed:

• The yellow track shows gun movement before you called pull. the green track shows movement before you fired and the grey track shows movement after firing.
• Below the "Gun motion is active" message you wil see a slider.

• Use your mouse or tracker pad to drag the slider so the blue dot is at your hold point. The blue dot represents the point your gun was pointing at when you called "Pull".
• The gun motion data for each target is stored along with the hit/miss data. You can display any target by simply clicking on it in the score card.