Hardware
Your DryFire pack contains:
- Simulator with two heads.
- 5V power supply with mains cable.
- Universal Gun Assembly (UGA) and barrel clamp.
- Wrap-round trigger switch and cable.
- USB cable.
Our article about the optional TS22 trigger switch contains instructions for fitting and use.
Using the wrong power supply
It is very important to use the 5V power supply provided with DryFire.
Most homes have lots of different power supplies lying around.
Using the wrong power supply will damage the simulator.
The two heads on the simulator will nod up and down when the USB cable is connected to a PC and the power supply is connected to the simulator and switched on at the mains.
If this doesn’t happen it probably means the wrong power supply has been used - either now, or in the past.
Please follow this link for a test procedure.